Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Page 3002

Page 9
background image

Install:

-

front timing belt cover.

Tighten to 12 Nm

-

the upper timing belt cover

-

the auxiliaries belt

-

the expansion tank and servo reservoir.

Note! Ensure that the hoses are correctly positioned.

-

the engine stabilizer brace. Tighten the screws at the suspension turrets. Tighten to 50 Nm. Tighten the engine bracket screw. Tighten to 80 Nm.

Carry out a function test

-

Check the oil level and top up if required

-

Start the engine

-

Check that there is no oil leakage.

Stop the engine and give the oil time to run down into the oil trough.
Then check the oil level.
Top up if necessary.
Wipe the engine compartment clean.
Ensure that the steering wheel and gear selector lever are clean.

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Page 3002

[PREV PAGE] [NEXT PAGE]