Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC70 AWD L6-3.2L VIN 95 B6324S5 (2011)

Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: > TJ23188 > Oct > 10 > Parking Assist System - Sensor Painting Instructions > Page 2247

Page 2
background image

1. For C70 (09w46-), C30 (-09w45), S60 (11-), XC60, XC90, S80, and V70/XC70 for all colours:

Sand sensor surface mechanically before painting use sanding paper with grit size P1000. (No need for activator at all after sanding.)

Please do the following:

- Clean the surface with isopropanol.

- Sand the surface carefully with P1000.

CAUTION!

If sanded to much there is a risk of eliminating the protective black layer.

Risk for corrosion if that is the case and then painted upon.

- Clean the surface with isopropanol.

- Paint.

2. For C70 (-09w45), C30 (09w46-), S40 and V50 for all colours except white and silver:

Use existing method in accurate installation instructions. (With the original activator.)

3. For C70 (-09w45), C30 (09w46-), S40 and V50 for white and silver:

Send sensors and holders to authorized paint supplier for painting. (For their expertise and conventional painting.

Info to them about material to be painted colour code and with a reference to the PIA site.

Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: > TJ23188 > Oct > 10 > Parking Assist System - Sensor Painting Instructions > Page 2247

[PREV PAGE] [NEXT PAGE]