volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

-

temperature-/pressure sensor as above

-

The O-ring from the throttle valve seat in the coupling housing.

Installation

Note! For tightening torques, see: See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
Drivetrain/Relays and Modules - Differential/Control Unit/Service and Repair

Components which are included in the kit and must be replaced

Temperature-/pressure sensor with O-ring.
Washer.
O-ring for the throttle valve seat.

Installing the included components

Install:

-

Differential electronic module (DEM)

-

the seal plate

-

the washer

-

the throttle plate with the O-rings

-

temperature-/pressure sensor with the O-rings

-

the screws.

The O-ring for the throttle valve seat is installed separately.

Placing the sealing plate in the control module

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - Differential > Differential Temperature Sensor/Switch > Component Information > Service and Repair > Temperature / Pressure Sensor Active On Demand Coupling (AOC), Replacing > Page 2299

< PREV PAGE NEXT PAGE >