XC70 AWD L6-3.2L VIN 98 B6324S (2009)
Place the sealing plate in the control module
Press the throttle valve and the temperature-/pressure sensor into place on the control module connector. Place the cupped washer with the convex side
against the temperature-/pressure sensor.
Lubricate the sealing rings on the valves. Use oil.
Installing the O-ring
Carefully check that the control module sealing surface and the valve seats in the Active on Demand Coupling (AOC) are clean, there must be no residue
left from cloths or paper.
Lubricate the new O-ring using oil and securely press into its seat.
Installing the Active on Demand Coupling (AOC)
Install the control module with the valves for the coupling, hold it pressed against the coupling housing while installing the 2 x screws. Lightly tighten
alternately.
