volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 44
background image

See the illustration.
At the same time pull the cable carefully backwards.

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and the cable terminal has locked by carefully pulling the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector Type 1

Connector type 1

Special tools:

951 2636 Terminal removal tool  See: Tools and Equipment/951 2636 Terminal Removal Tool 
951 2637 Terminal removal tool  See: Tools and Equipment/951 2637 Terminal Removal Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Disassembly

Disassembling secondary lock

Angle up the secondary lock (1), see image. Use an electrician's screwdriver.

Disassembling primary lock

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 2531

< PREV PAGE NEXT PAGE >