volvo Workshop Repair Guides

Volvo Workshop Manuals

[PREV PAGE] NEXT PAGE >
Page 45
background image

Use tool: 951 2636 Terminal removal tool  See: Tools and Equipment/951 2636 Terminal Removal Tool  and 951 2637 Terminal removal tool  See:
Tools and Equipment/951 2637 Terminal Removal Tool  to remove the primary lock, see graphic.
At the same time pull the cable carefully backwards.

Assembly

Assembling primary lock

Check that the cable terminal's catches are undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector Type 2

Connector type 2

Special tools:

Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 2532

[PREV PAGE] NEXT PAGE >