XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Place the microphone's bracket over the hole on the backrest.
-
Point the microphone arm 45° forward. Press down the headrest so that it locks into place.
-
Check that the headrest has locked into place by pulling it upwards.
-
Route the cable in front of the tube (1).
-
Secure the cable with a cable tie to the large connector (2).
-
Reinstall the upholstery for the backrest.
-
Lay the cable in the carpet joint. Route the cable forward and across in the centre console.
Note! It is important that the cable has the right length so that the seat can move back and forth freely.
