volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bluetooth, Swan Neck Microphone|Page 12832 > < Bluetooth, Swan Neck Microphone|Page 12830
Page 13
background image

-

Route the cable on the left side of the opening for the glove box.

-

Find the foam tape with connections for the Bluetooth system. Cut the cable tie and open the foam tape.

-

Loosen existing connection to the microphone.

-

Connect the new microphone cable. Reinstall the foam tape and secure with a new cable tie.

Note! Also secure the extra length of the microphone cable with the foam tape.

Reinstall:

-

the gear lever panel

-

the glove box

-

the sound barrier

-

the side panels on the centre console.

Applies to C30, S40, V50 and C70

-

Turn the ignition switch to position 0.

Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.

Bluetooth, Swan Neck Microphone|Page 12832 > < Bluetooth, Swan Neck Microphone|Page 12830