XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Place the door panel on a suitable underlay, on a blanket or carpet, for example
-
Carefully cut the oil cloth out from the inside of the loudspeaker grille. Cut along the edges of the smaller round hole where the mid-range element
is to be positioned.
Note! Only cut through the oil cloth. Do not damage the underlying fabric.
-
Screw the new loudspeaker into place using the screws, washers and the nuts from the kit (1). The washers must be positioned under the screw
heads. Make a hole in the round piece of tape covering the screw hole to insert the rear screw
-
Reinstall the panel (2) for the cable lead-in.
-
Connect the connectors (3) to the loudspeaker and the module for the door controls
-
Reinstall the mechanical cable (4) on the door opener handle (5)
-
Reinstall the door panel, the treble loudspeaker and the door handle panel.
Loudspeaker, D-Post, Replacing
Loudspeaker, D-post, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the loudspeaker in the D-post