XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Detach the top edge of the sill trim panel to access the seat belt mounting in the end mounting.
Illustration B
-
Remove the seat belt from the end mounting. First carefully press down the lug as illustrated in illustration B so that the seat belt releases from the
end mounting. Use a weatherstrip tool.
Illustration A
-
Continue to pull off the sill trim panel until the remaining clips release
-
Unhook the sill trim panel from the B-post panel. Place the sill trim panel in the cargo compartment
-
Remove the seat.
Note! Lift the seat out of the passenger compartment carefully. Ensure that the mountings do not damage the door panels.
Applies to all models
-
Pull off the rubber strip at the rear edge of the door opening for the left-hand rear door opposite the left C-post panel
-
Carefully pry off the left-hand C-post panel at the sides at the top edge. Use a plastic weatherstrip tool. Pull off until the three clips on the inside
