XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
release. Do not damage the headlining or the panel
-
Remove the panel by pulling upwards slightly and unhooking it from the side panel.
Applies to cars up to and including model year -2004 (CH -133999)
-
Fold up the floor carpet. Secure the floor carpet using one of the seat belts
-
Carefully fold up the insulation. Place a shim underneath so that the connector bridge can be exposed.
Note! Do not damage the insulation. It is brittle and breaks easily.
Applies to all models
-
Remove the covers and the screws underneath for the rear headlining
-
Carefully pry off the panel at the rear edge. Use a plastic weatherstrip tool
-
Pull the rear edge of the panel downwards until all clips on the inside have released
-
Disconnect the connector for the rear roof lighting (applies to cars with three rows of seats)
-
Pull the panel backwards to release it.
-
Pull off the left-hand D-post panel starting at the top edge. Then pull downwards until the three clips on the inside have released. Do not damage