XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
the panel
-
Remove the panel by pulling upwards slightly and unhooking it from the side panel. Disconnect the connector if the car has a loudspeaker in the
D-post.
Illustration A shows the removal of the cover for the load securing eyelets for all models
-
Fold out the load securing eyelet
-
Insert a scriber with an angled tip into the hole in the top of the cover
-
Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull the cover off.
Illustration B applies to cars with two rows of seats
Illustration C applies to cars with three rows of seats
-
Fold up the seats in the third row (applies to cars with three rows of seats)
-
Remove the screws (2) for the load securing eyelets in the left-hand side panel
-
Remove the covers (3) over the front mountings for the left-hand side panel. Pry the covers off. Use a plastic weatherstrip tool or a small
screwdriver
-
Remove the screws (4)