XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Tighten the M6 screws. Tighten to 10 Nm (7 lbf.ft.). Tighten the M8 screw. Tighten to 24 Nm (18 lbf.ft.).
Cable routing and connecting to the fusebox and Subwoofer
Applies to cars up to and including model year -2004 (CH -133999)
-
Take the cable harness (A in the kit illustration) from the kit. Position the end of the cable harness, with two plastic connectors, at the rear of the
fuse holder
-
Route the cable harness along the upper edge of the left-hand rear wheel well. Continue along the front edge of the wheel arch, under the member
for the rear mounting for the second row of seats and up to connector bridge under the left-hand seat on the second row of seats.
-
Take the red cable from the cable harness. Install the cable on the reverse of the fusebox in position 13 and socket 2 as illustrated
-
Take the 15 Amp fuse from the kit. Install the fuse in position 13 in the fusebox.
-
Take the relay from the kit. Install the relay in position MA2 in the fusebox.