XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Visual inspection of third row outer end mountings, lower
3
A:
The lock facing is in the correct position here.
Note!
It is important that the lock facing plate (shaded in the illustration) lie flat against the end mounting, and that the lock pin is all the way through the
other side.
B:
If the lock facing plate does not lie flat, replace the end mounting according to the method in VADIS.
Checking the upper seat belt mountings on the second row of seats,
4
outer seats
Remove the cargo compartment cover, cargo net, etc. (if applicable) before removing the inner panel in the vehicle.
Remove:
-
the door weatherstrip from the panel edge.
