XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.
Running board
-
Wash underneath the door sills, in front of the rear wheels and behind the front wheels on the left and right hand sides
-
Raise the car.
Note! Ensure that the lifting tool does not obstruct the mounting point of the "Running board".
-
Remove the two M10 screws from the front overhang and the two M12 screws at the rear on the left and right hand sides. Place the screws to one
side. They will not be reused
-
Clean any dirt and underseal from the mating surfaces where the "Running board" is to be mounted.
