XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Take an aluminium profile, a mounting of each type, four M8 screws and washers from the kit. Install the mountings in the aluminium profile as
illustrated. Screw in the four M8 screws. Check that there is no gap between the aluminium profile and the mounting brackets at (A). Tighten the
M8 screws. Tighten to 25 Nm (19 lbf. ft.)
-
Repeat the operation on the other aluminium profile.
Hint: It is recommended that two people carry out the installation of the "Running board".
-
Install the "Running board" using M10 (1) and M12 (2) screws with the relevant washers.
-
Tighten the M10 screws (1). Tighten to 50 Nm (37.5 lbf. ft). Tighten the M12 screws (2). Tighten to 80 Nm (60 lbf. ft).
-
Install the front mudguards according to the separate installation instructions.
