volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Door Window Glass|Service and Repair|Page 15696 > < Rear Door Window Glass|Service and Repair
Page 2
background image

Raise the side window to the half open position.
Remove the 2 x rivets where the window is connected to the lift mechanism.
Lift out the side window.

Installing the window in the rear side door

Note! For tightening torques, see: Specifications.

Install:

-

the side window

-

the 2 x rivets where the window is connected to the lift mechanism.

Lower the window completely.

Hint: Use a little soap when installing the glass unit.

Caution! Guide the fixed window/glass unit towards the side window at installation.

Install the fixed window/glass unit.
Pull the fixed glass backwards towards the door arch.

Install:

-

the 1 x M5 screw in the door arch and tighten

-

the 1 x M6 screw in the door and tighten

-

the weatherstrip in the door frame

-

the weatherstrip at the bottom edge of the inside of the side window

-

the soundproofing

-

the speaker as described in Loudspeaker, rear side door, replacing See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Speaker/Service and Repair/Loudspeaker, Rear Side Door, Replacing 

-

the panel. See Panel rear side door, replacing See: Rear Door Panel/Service and Repair/Panel Rear Side Door, Replacing.

Clean the window.

Fixed window rear side door, replacing

Removing the fixed window from the rear side door

Rear Door Window Glass|Service and Repair|Page 15696 > < Rear Door Window Glass|Service and Repair