volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Door Window Motor > < Rear Door Window Glass|Service and Repair|Page 15695
Page 3
background image

Remove:

-

the side window. See Removing the window from the rear side door

-

the 2 screws.

Slide the glass unit forward.
Lift out the glass unit.

Installing the fixed window in the rear side door

Note! For tightening torques, see: Specifications.

Hint: Use a little soap when installing the glass unit.

Install:

-

the glass unit

-

the 1 x M5 screw in the door arch and tighten

-

the 1 x M6 screw in the door and tighten

-

the side window as described in Installing the window in the rear side door.

Clean the window.

Rear Door Window Motor > < Rear Door Window Glass|Service and Repair|Page 15695