XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Engine splash guard
-
Raise the car
-
Remove the screws (2). Remove the air baffle (1).
Illustration A applies to 5 cylinder engines
-
Lift up the engine splash guard towards the sub-frame. Install the two front screws (1 & 2) and washers. Finger tighten the screws
-
Position the spacer sleeves between the engine splash guard and the sub-frame as follows: Spacer sleeve L = 33 mm (1 5/16") at the hole (3).
Spacer sleeve L = 45 mm (1 3/4") at the holes (4)
-
Install the three screws and washers.
Illustration B applies to 6 cylinder engines