XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Lift up the engine splash guard towards the sub-frame. Install the two front screws (1) with and without washers. See the illustration. Finger tighten
the screws
-
Position the spacer sleeves between the engine splash guard and the sub-frame as follows: Spacer sleeve L = 33 mm (1 5/16") at the hole (2).
Spacer sleeve L = 45 mm (1 3/4") at the holes (3)
-
Install the three screws and washers.
Applies to all models
-
Tighten the screws. Tighten to 25 Nm (19 lbf. ft.)
-
Allow the material to "settle" for approximately one minute. Post-tighten all the screws.