XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Subframe: Service and Repair
Sub-frame rear, replacing
Special tools:
999 5500 Socket Upper Nut Rear Shock Absorber See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7030 Mounting bracket bushing replace See: Tools and Equipment/999 7030 Mounting Bracket Bushing Replace
999 7031 Locating pin See: Tools and Equipment/999 7031 Locating Pin
999 7039 Connecting rod M16X360 See: Tools and Equipment/999 7039 Connecting Rod M16X360
998 5434 Separator L 200 mm See: Tools and Equipment/998 5434 Separator L 200 mm
999 7074 Adapter plate See: Tools and Equipment/999 7074 Adapter Plate
999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Preparatory work
Reassemble and lock the self-adjuster unit for the parking brake. See Parking brake self-adjustment, resetting See: Brakes and Traction Control/Parking
Brake System/Adjustments/Parking Brake Self-Adjustment, Resetting.
Raise the car.
Remove the wheels.
Removing the exhaust system
Start at the front when separating the three-way catalytic converter (TWC).
Hang up the three-way catalytic converter (TWC) on a hook.
Remove:
-
the mountings in the sub-frame
-
the rearmost exhaust mounting