XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Net pocket, cargo compartment (7 seat)
Illustration A is for making holes on the left-hand side
Illustration B is for making holes on the right-hand side
-
Mark the rear edge of the left-hand side panel for holes for the net pocket. See the illustration
-
Drill out the holes. Use a 3 mm (1/8") diameter drill bit. Use a 10 mm (25/64") drill stop
-
Remove the swarf. Smooth out the hole edges if necessary.
-
Take two clips and two screws from the kit. Tighten the clips horizontally in the newly drilled holes as illustrated.