XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Press the shorter face of the net pocket into place in the clips so that a snap is heard.
-
Take two clips from the kit
-
Insert the front face of the net pocket against the side panel. Ensure that the lower face is parallel with the joint between the side floor hatch and
the centre rear floor hatch
-
Position the two clips as illustrated. Mark for drilling through the holes in the clips and in the panel using a ball tipped punch or press through
using a scriber.
-
Push the net pocket to one side
-
Drill out the holes. Use a 3 mm (1/8") diameter drill bit. Use a 10 mm (25/64") drill stop
-
Remove the swarf. Smooth out the hole edges if necessary.
