XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Hint: Press the wire to one side. Use a screwdriver.
Remove the upholstery.
Installation
Installing backrest upholstery
Put on the upholstery.
Install:
-
the half moon clips in the seams
Hint: Start with the upper seam.
-
the clips on the back of the backrest.
Close the zip fastener at the side
-
the Velcro seams on top of the backrest
-
half moon clips at the bottom of the backrest.
Installing the backrest
Hint: If both backrests have been removed, it is best to assemble 60% of the backrest first.
Install:
-
the backrest
-
the mounting screw for the hinge. Tighten to 50Nm
-
the connector for the hinge
-
mounting for the end of the seat belt. Tighten to 48 Nm
