XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install the needle jet. Use special tool 951 1204 REMOVAL TOOL See: Tools and Equipment/951 1204 Removal Tool.
Tighten the needle jet. Use special tool 981 1994 Valve needle wrench See: Tools and Equipment/981 1994 Valve Needle Wrench. Tighten to 6 Nm.
Note! Use only your finger and thumb when tightening the needle jet to avoid damage to the valve seal.
Vacuum pump. See Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the system with refrigerant. See Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
Test for leaks. See Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and General Diagnostics/Leak
Tracing, Fluorescent Tracing Agent/UV Lamp or Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Electronic Leak Tracer.
Install the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
