XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
the pipe lock from the pipe holder. Remove the lock and the holder.
To replace the pipes for the expansion valve - junction block on the side member, see replace.
To replace the expansion valve in the receiver drier, see replacing.
To replace the junction block in the cowl, rear expansion valve, see replacing.
Finishing work (operations common to all methods)
Install the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Vacuum pump the air conditioning (A/C) system. See Vacuum pumping See: Heating and Air Conditioning/Service and Repair/Vacuum Pumping.
Fill the air conditioning (A/C) system with refrigerant. See Refrigerant, filling See: Heating and Air Conditioning/Service and Repair/Refrigerant, Filling
Leak trace the air conditioning (A/C) system. See Leak tracing, fluorescent tracing agent / UV lamp See: Heating and Air Conditioning/Testing and
Inspection/Component Tests and General Diagnostics/Leak Tracing, Fluorescent Tracing Agent/UV Lamp or Leak tracing, electronic leak tracer See:
Heating and Air Conditioning/Testing and Inspection/Component Tests and General Diagnostics/Leak Tracing, Electronic Leak Tracer.
Install the rear side panel. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Side Panel Cargo Compartment, Replacement.
Pipes expansion valve - junction point side member, replace
Removing pipes from the expansion valve - junction block on the side member
the hose/pipe from the member to the compressor
the pipe from the receiver drier to the expansion valve from the mounting at the junction block
the pipe from the member at the pipe coupling.
Detach the pipe at the expansion valve.
Position the front section of the pipe above the front cover plate.
Pull the rear edge of the pipe up and out. Remove the pipe.