XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Roll up two balls of paper or other clean material. Stuff the balls between the headlining and the roof as illustrated.
Do not damage or crease the headlining.
Removing the mass movement sensor
Remove the black installation tape. Discard the installation tape.
Carefully remove the mass movement sensor and remove the connector
Remove the old adhesive residue. Roll it with your fingers.
Installing the felt tape
Install 2 x pieces of felt tape on the interior lighting. Bend over the edge as illustrated.
Installing the mass movement sensor, preparatory work