volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

The ohmmeter should read approximately 0 ohms.

OK - Procedure complete

Not OK - Checking for open-circuits, contact resistance and oxidation

-------------------------------------------------

Checking for open-circuits, contact resistance and oxidation
For the control module
, check ground terminal 31/84 and the wiring connected to it. Check for an open-circuit. See Checking wiring and terminals.
Permanent fault See: Accessories and Optional Equipment/Cellular Phone/Testing and Inspection/Component Tests and General Diagnostics/Checking
Wiring and Terminals. Permanent Fault. Check for contact resistance and oxidation. See Checking wiring and terminals. Permanent fault See:
Accessories and Optional Equipment/Cellular Phone/Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals.
Permanent Fault.

Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Mounted Controls Communication Module > Component Information > Testing and Inspection > Reading and Clearing Diagnostic Trouble Codes > Page 1202

< PREV PAGE NEXT PAGE >