volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 11933 > < Procedures|Page 11931
Page 6
background image

Reinstalling and checking

Secure the new SRS cable next to the old cable using a tie strap or similar. Reinstall the connectors.
Reconnect the battery. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting 
Turn the ignition to position 2.
Check the SRS system to ensure that the warning lamp comes on and stays on while the SRS system performs a self-test. The lamp must go out after a
few seconds. If not, perform fault-tracing according to VIDA vehicle communication.
If everything is working, reinstall other components.
Test drive the vehicle.

Procedures|Page 11933 > < Procedures|Page 11931