XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove:
-
the screw (1). Install the screw in the contact reel (2).
-
the steering wheel. Pull the wiring out of the hole (3).
Installing the new steering wheel
-
Install the new steering wheel.
Applies to cars with vibration damper
-
Install the vibration damper in the new steering wheel and secure it with the screw, see step Sports steering wheel, wood/leather See: Sports
Steering Wheel, Wood/Leather.
Note! Make sure the screw is properly tightened and that the vibration damper is secure. The screw is self-tapping, which can make it
difficult to tighten.
Applies to cars with RTI keypad mounted to the steering wheel when installing in a wooden steering wheel
Illustration A
-
Place the steering wheel in a suitable position and cut along the existing marks with a small knife.
Note! When cutting, make sure to hold the knife so that the cuts are perpendicular to the reverse side of the steering wheel. This will reduce the
risk of cutting a hole that is too large since the edge around the keypad is only a few millimeters larger than the keypad itself.
Illustration B
-
Cut away some of the material on the reverse side of the steering wheel spoke.
-
Test and cut until the keypad fits properly.
