XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Applies to cars with RTI keypad mounted to the steering wheel when installing in a wooden steering wheel
-
Install the keypad, two screws and clamp. Make sure the cable is positioned on the underside of the steering wheel spoke.
-
Insert the keypad into the hole in the steering wheel with the text on the buttons facing out. Press until it connects securely against the steering
column cover.
Applies to cars with RTI keypad mounted to the steering wheel when installing in a wooden steering wheel
-
Install the screws and attach the keypad with the clamp around the steering wheel spoke.
Applies to cars with RTI keypad mounted to the steering wheel
-
Position the horn ring as illustrated.
-
Plug in the keypad connector to the terminal on the reverse side of the keypad located on the right-hand side of the horn ring. The wire from the
installed keypad is very short and it can be difficult to install the connector.
-
Reinstall the horn ring in the steering wheel, see steps Sports steering wheel, wood/leather See: Sports Steering Wheel, Wood/Leather - Sports
steering wheel, wood/leather See: Sports Steering Wheel, Wood/Leather. Make sure that the three springs on the underside are correctly
positioned. Check that the ground lead is not trapped.
-
Install the three screws in the horn ring and tighten crosswise them to 8 ± 2 Nm (6 ± 1.5 lbf.ft.).
Note! The screws are self-tapping.
