XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Reinstall the ground lead. Tighten.
Note! Make sure the screw is properly tightened and that the ground lead is secure. The screw is self-tapping, which can make it difficult
to tighten.
-
Check the function of the horn by pressing the horn around its entire circumference. A metallic noise should be heard when the three contact points
come into contact
-
Insert the wiring through the hole in the new steering wheel. Insert the airbag ignition cables through the holder (1).
-
Carefully install the new steering wheel by holding it straight and aligning the locating pins (2) on the contact reel.
-
Remove the screw from the contact reel and reinstall the screw in the holder. See step Sports steering wheel, wood/leather See: Sports Steering
Wheel, Wood/Leather.
-
Install the new screw (3). Tighten to 40 Nm (30 lbf.ft.).
-
Plug in the connector (4).
-
Check that the two springs (1) are in position
-
Press the two connectors for the ignition cables for the airbag into the steering wheel module
-
Insert the two pins on the reverse of the steering wheel module in the two springs. Ensure that the ignition cables are not trapped
-
Press the steering wheel module firmly into its mountings. (Two clearly audible clicks should be heard)
Supplementary work