XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Unscrew the screws until they release from the threads and spring back.
-
Fold out the steering wheel module (2).
Note! Handle the cables with care.
Remove:
-
the connector (1) for the horn.
-
the SRS connectors (2). Press in the catches on the sides and carefully pull the connectors straight back.
Note! Although the connectors are tightly secured, do not use any tools when removing.
-
the steering wheel module. Place the steering wheel module safely with the front side facing upwards.
-
the bolt (3), but leave the steering wheel in place.
-
the vibration damper (4), if applicable.
-
the connector for the RTI keypad, if applicable.
Remove:
-
the screw (1). Install the screw in the contact reel (2).
-
the steering wheel. Pull the wiring out of the hole (3).
Installing the new steering wheel
-
Install the new steering wheel.
Applies to cars with vibration damper
-
Install the vibration damper in the new steering wheel and secure it with the screw.
Note! Make sure the screw is properly tightened and that the vibration damper is secure. The screw is self-tapping, which can make it
difficult to tighten.
Applies to cars with RTI keypad mounted to the steering wheel when installing in a wooden steering wheel
