XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Illustration A
-
Place the steering wheel in a suitable position and cut along the existing marks with a small knife.
Note! When cutting, make sure to hold the knife so that the cuts are perpendicular to the reverse side of the steering wheel. This will reduce the
risk of cutting a hole that is too large since the edge around the keypad is only a few millimeters larger than the keypad itself.
Illustration B
-
Cut away some of the material on the reverse side of the steering wheel spoke.
-
Test and cut until the keypad fits properly.
Applies to cars with RTI keypad mounted to the steering wheel when installing in a wooden steering wheel
-
Install the keypad, two screws and clamp. Make sure the cable is positioned on the underside of the steering wheel spoke.
-
Insert the keypad into the hole in the steering wheel with the text on the buttons facing out. Press until it connects securely against the steering
column cover.
