XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Insert the wiring through the hole in the new steering wheel. Insert the airbag ignition cables through the holder (1).
-
Carefully install the new steering wheel by holding it straight and aligning the locating pins (2) on the contact reel.
-
Remove the screw from the contact reel and reinstall the screw in the holder.
-
Install the new screw (3). Tighten to 40 Nm (30 lbf.ft.).
-
Plug in the connector (4).
-
Check that the two springs (1) are in position
-
Press the two connectors for the ignition cables for the airbag into the steering wheel module
-
Insert the two pins on the reverse of the steering wheel module in the two springs. Ensure that the ignition cables are not trapped
-
Press the steering wheel module firmly into its mountings. (Two clearly audible clicks should be heard)
Supplementary work
-
Turn the ignition key to position II.
-
Reconnect the battery negative lead.
