XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Align the drift so that the screw is opposite the cast joint of
the control arm.
Use socket 999 7210. With the hole centered, turn the socket
in the same direction as the screw/cast joint.
Carefully press in the bushing until the threaded hole in the
bushing shaft can be seen through the socket hole.
7.
Transfer the screw and tighten it so that its unthreaded
section covers the edge of the socket hole.
Press in the bushing until the unthreaded section of the
screw touches the upper edge of the hole. The bushing is
now in the correct position.
Removal: