XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Transfer the screw and tighten it in so far that the screw's unthreaded part covers the edge on the sleeve's hole.
Press in the bushing until the screw's unthreaded part just touches the hole's upper edge. The bushing is now in the right position.
Removal
Removing the rear bushing
Place the link arm in a workshop press. Use 999 7209 Socket See: Tools and Equipment/999 7209 Socket and 999 7051 Drift See: Tools and
Equipment/999 7051 Drift , and a suitable sleeve.
Press out the bushing.
Installation
Installing the rear bushing
Note! Pay close attention to the bushing's position in the link arm.
The two slots in the bushing's inner sleeve shall be placed in 75 degrees direction in relation to the longitudinal line, see figure.
Mark up the bushing and link arm with a color marker.