volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bushings Link Arm, Replacing|Page 11050 > < Bushings Link Arm, Replacing|Page 11048
Page 1
background image

Lateral Stabilizer Rod: Service and Repair
Lateral Link, Replacing

Lateral link, replacing

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Preparation

Remove the wheel.
Install tensioner999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper. See Tensioner 999 5659, User instructions See: Service
and Repair/User Instructions. Set the rear suspension to the normal position.

Removing the lateral link

Remove:

-

both the screws for the lateral link

-

the lateral link.

Tightening torque

For tightening torques, see Specifications See: Steering/Specifications/Mechanical Specifications.

Installing the lateral link

Install the lateral link. Use new screws.
Tighten the screws (M12).

Finishing

Lower and remove the tensioner. See Tensioner 999 5659, User instructions See: Service and Repair/User Instructions.

Bushings Link Arm, Replacing|Page 11050 > < Bushings Link Arm, Replacing|Page 11048