volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Pinion Seal for the Bevel Gear|Page 6334 > < Replacing the Pinion Seal for the Bevel Gear|Page 6332
Page 5
background image

The bevel gear is supplied filled with oil, however, always check the oil level.
Use the right oil. See: See: Specifications

Correct volume 650 ml
Fill with oil up to the filling plug. Draw out 0.1 L oil.
Tighten the level plug. See See: Specifications/Mechanical Specifications/Tightening Torque

Replacing the Pinion Seal for the Bevel Gear|Page 6334 > < Replacing the Pinion Seal for the Bevel Gear|Page 6332