XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Check that the marking corresponds exactly. Check the height. See Marking the position of the adjustment nut.
Install the split pin. Tighten the screw. Tighten to 50 Nm.
Checking the oil level in the bevel gear
Check the oil level in the bevel gear. See Replacing the pinion seal for the bevel gear See: Replacing the Pinion Seal for the Bevel Gear
Note! To install the drive shaft, see Replacing the front right drive shaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Drive Shaft Right, Replacing.