XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Press out the 4 catches from the top panel. Remove the boot.
Installation
Installing a new boot
Install the new boot
Press the catches for the boot into place in the top panel.
Installing the top panel
Angle the panel downwards. Press the top panel into place in the center console.
Install the panel (the pen holder) between the center console and the dashboard.
Installing the gear selector knob
Install the gear selector knob (standard) with lock function. See Gear selector knob, replacing See: Gear Selector Knob, Replacing.
or
Install the gear selector knob (Geartronic) with lock function. See Gear selector knob, Geartronic, replacement See: Gear Selector Knob, Geartronic,
Replacement.
Boot Gear Selector, Replacing
Boot gear selector, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the gear selector lever boot panel with the boot from the center console