volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 6447 > < Removal and Replacement|Page 6445
Page 22
background image

Note! The automatic transmission has one gear selector cable while the manual transmission has two cables.

Ensure that the gear selector cable is locked in position before installing the blue clip. Press the clip into place as illustrated.

Check that the clip is positioned in the groove as illustrated.

Installing the air cleaner (ACL) housing

Install the air cleaner (ACL) housing, including all hoses and electrical terminals.

Installing the front wheels

Install the front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Gaiter, Gear Selector, Replacement

Gaiter, gear selector, replacement

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Removal

Removing the gear selector knob

Remove the gear selector knob in accordance with: Gear selector knob, replacing See: Gear Selector Knob, Replacing (standard) or in accordance with:
Gear selector knob, Geartronic, replacement See: Gear Selector Knob, Geartronic, Replacement (geartronic).

Removing the panel

Removal and Replacement|Page 6447 > < Removal and Replacement|Page 6445