XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Illustration B shows how the hoses are routed to the oil cooler
-
Remove the two hoses from the kit and remove the dust covers
-
Insert the hoses down to the left-hand side of the radiator. Connect the hoses in the engine compartment to the gearbox (1) and radiator (2) where
the hose was removed earlier. Do not tighten the connection nut
-
Route the hoses between the left-hand side of the radiator and the pipe to the air conditioning (A/C) system.
-
Take the nut clip from the kit and press it into place on the lower left edge of the radiator on the existing mounting.
Illustration A shows how the hoses are connected to the oil cooler
