XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Left-hand side
Preparatory removal
See Replacing the front left drive shaft See: Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.
Removing the drive shaft seal
Use a jimmy bar with a flat surface. Turn the flat surface towards the transmission housing.
Installing the drive shaft seal
Note! Clean thoroughly before installing the new seal
Apply a small amount of grease to the sealing lip.
Use drift 999 5541 PUNCH See: Tools and Equipment/999 5541 Punch and shaft 999 1801 STANDARD SHAFT See: Tools and Equipment/999 1801
Standard Shaft.
Place the side of the drift marked M56 against the drive shaft seal.
Installing the drive shaft in the transmission
See Replacing the front left drive shaft See: Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.
Seal Drive Shaft/Differential, Replacing
Seal drive shaft/differential, replacing
Special tools:
999 5768 Puller See: Tools and Equipment/999 5768 Puller
999 5769 Pilot See: Tools and Equipment/999 5769 Pilot
999 5770 Drift See: Tools and Equipment/999 5770 Drift
999 5771 Drift See: Tools and Equipment/999 5771 Drift
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
