XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Pull the weatherstrip off forwards.
Installation
Installing the trim strip rear side window
Check that the clips are intact.
Clean the molding area. Use "Cleaner H" or cleaning alcohol.
Apply adhesive P/N 116 1767 at (1) and (2).
Press the weatherstrip into place.
If necessary, apply double-sided adhesive tape or position a suction clamp 951 2841 Suction clamp See: Tools and Equipment/951 2841 Suction clamp
at (2) to hold the molding while the adhesive cures.
Note! Replacing the four lower clips at the fixed quarter window.
Install the 4 x new clips at each position.