Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 3105

Page 1
background image

Crankshaft: Service and Repair
Crank Mechanism, Assembling

Crank mechanism, assembling

Special tools:

951 2767 Roller See: Tools and Equipment/951 2767 Roller 
999 1801 STANDARD SHAFT See: Tools and Equipment/999 1801 Standard Shaft 
999 5676 Drift replaced by 9997174 See: Tools and Equipment/999 5676 Drift Replaced by 9997174 
999 5746 Holder See: Tools and Equipment/999 5746 Holder 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Tightening torque

For tightening torques not in the text, see Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.

Cleaning

Ensure that the all components are completely clean.
Blow clean the oil ducts in the block, intermediate section and oil pan.

Installing the piston cooling valve and nozzles

Install the piston cooling nozzles. Tighten to 17 Nm.

Install the piston cooling valve. Use a seal washer. Tighten to 38 Nm.

Classification of main bearings

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft, Engine > Component Information > Service and Repair > Crank Mechanism, Measuring > Page 3105

[PREV PAGE] [NEXT PAGE]