XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
Remove the locking sleeve over the cable splice on the cable (1) for the front engine block heater socket. Pull off the cable.
Illustration B applies to cars with an engine block heater only
-
Remove the locking sleeve over the cable splice on the cable (1) for the front engine block heater socket. Pull off the cable.
-
Cut off the four tie straps holding the cable for the front engine block heater socket at the sub-frame. Leave the clips in the sub-frame
-
Remove the cable from the sub-frame. Allow the cable to hang.