XC90 25T Engine Block Heater Relay Replacement Guide
Applies to cars with two rows of seats
-
Remove the two centre floor hatches. First lift up slightly and then pull them loose from the mountings at the front edge.
If the rear centre floor hatch is equipped with a carrier bag holder on the lower side, the floor hatch is secured by a strap on each of the shorter sides of
the storage box. These must be removed.
-
Remove the storage box underneath.
Illustration B
Applies to cars with three rows of seats and integrated carrier bag holder on the under side of the centre floor hatch
-
Fold up the centre rear floor hatch (1)
-
Detach the two straps from the panel underneath. Lift up the panel at the rear edge. Fold the floor hatch back towards the panel and lift out the
floor hatch and the panel.
Applies to cars with three rows of seats without integrated carrier bag holders
-
Lift up the centre rear floor hatch at the rear edge and lift it out.
Applies to all models
-
Remove the right and left-hand side floor hatches (2).
Illustration C
