Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Engine Mount > Engine Torque Strut > Component Information > Service and Repair > Replacing The Torque Rod > Page 3223

Page 2
background image

Install

-

the torque bracket. Tighten the screws (A). Tighten to 50 Nm

-

the screw for the dip stick pipe (6 cylinder automatics only)

-

the cover over the ignition coils

-

the oil filler cap

-

the charge air pipe (only turbocharged (TC) engines)

-

the engine stabilizer brace.

Tighten the screws on the suspension turrets. Tighten to 50 Nm.Tighten the screw in the torque bracket (B). Tighten to 80 Nm.

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Engine Mount > Engine Torque Strut > Component Information > Service and Repair > Replacing The Torque Rod > Page 3223

[PREV PAGE] [NEXT PAGE]