Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Oil Pump/Crankshaft Seal, Front, Replacing

Page 1
background image

Front Crankshaft Seal: Service and Repair
Oil Pump/Crankshaft Seal, Front, Replacing

Oil pump / crankshaft seal, front, replacing

Special tools:

999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold 
998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100 
999 5919 PULLER See: Tools and Equipment/999 5919 Puller 
999 5455 PUNCH See: Tools and Equipment/999 5455 Punch 
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Note! If the oil pressure is low or if there is possibly a fault with the oil pump, measure the oil pressure.

Remove engine components

Caution! Remove the ignition key.

Remove

-

the cross stay between the suspension turrets

-

the upper timing belt cover

-

the servo reservoir and expansion tank. Lift up and place on top of the engine.

Warning! Ensure that no power steering fluid is spilled. Extremely flammable.

-

the auxiliaries belt

-

the front timing belt cover.

Position the engine according to the marking

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Oil Pump/Crankshaft Seal, Front, Replacing

[PREV PAGE] [NEXT PAGE]